Martin 000-45 from 1938. Neck reset in process.

WHEN PERFECTION IS THE ONLY OPTION

World famous repairs & restoration

Folkway's repair shop is built on a commitment to perfection that is unwavering. We sweat the small stuff, massage every detail, measure in microns, and expect only the highest standard of repairwork off our repair benches. We're sticklers for perfection in every facet of what we do. Whether that's fitting a saddle to ensure perfect contact with a bridge, gluing a top crack in perfect alignment, or removing the neck off a 90 year old guitar without damaging the surrounding finish, we get it done right. There are no second chances in guitar restoration, and we take that very seriously.

TESTIMONIALS

Man fixes a vintage guitar at Folkway Music.  Neck removed from body, tools around.

UNWAVERING COMMITMENT TO QUALITY

Historically accurate. Vintage sensitive.

We take 'Vintage' seriously, and ensure that each guitar serviced on our benches receives restoration work that is in keeping with its age and pedigree. We use traditional glues, finishes, materials and techniques in our repairwork - hot hide glue, Nitrocellulose lacquer, historically accurate woods, and the same assembly techniques used a century ago when repairing vintage guitars. We'll even re-fret a vintage guitar with new-old-stock fretwire when appropriate, or install original parts and hardware if that's what it takes to make a vintage guitar just right. Each repair is different, but our repair team has the knowledge and experience to handle any vintage-accurate restoration.

METICULOUSLY ACCURATE

Imperceptible. Like we were never there.

We're famous for vanishing. Our repair crew enjoys a well earned reputation for the invisibility of our work. Need a neck reset that's undetectable other than a guitar's perfect action and saddle height when it's done? That's our thing. Want a replacement bridge that is indistinguishable from an original? We can show you hundreds we've made and installed. Hoping for a lacquer finish repair that's seamlessly blended, color matched, and aged to have a patina that's just right? We've got you covered. Nothing we do is easy and most of it isn't quick, but clients from all over the world seek us out over and over again specifically for the brand of restoration that we've become famous for.

Close-up of bridge and firestripe pickguard on a vintage Gibson L-0 from 1937

OUR REPAIR SHOP TEAM

Meet Folkway’s world-renowned repair & restoration team

Folkway’s expert repair specialists always have something interesting on their benches. Meet our incredible team, below.

  • Man holding a vintage Martin D-28 acoustic guitar in a workshop setting

    Mark Stutman

    Senior Repair Specialist / Founder

    Mark Stutman

    Mark Stutman

    Mark is Folkway Music’s founder, owner, and senior instrument restoration specialist. With a deep love for vintage acoustic guitars and a passion for detail, he has become one of the most educated and well-respected names in today’s vintage guitar industry. Mark has an encyclopaedic knowledge of vintage Gibson and Martin acoustics and has spent the better part of thirty years refining his skills in vintage acoustic guitar restoration. The son of an audiophile and a designer, Mark was raised with a keen ear for tone and an exacting eye, both of which form the fundamentals of his guitar restoration philosophy. He loves the idiosyncrasies of vintage Gibson guitar construction, and can often be found at his repair bench comparing instruments from the 1930s. His current favourite instruments are his 1933 Gibson L-00, ’49 Gibson LG-2, and his factory-lefty 1966 Martin GT-70 electric, which he plays through a 1960 Gibson GA-20T most of the time.

  • Man at a workshop with tools and guitars

    Dave Martin

    Repairshop Manager

    Dave Martin

    Dave Martin

    Dave honed his craft under master luthier Sergei de Jonge, completing several instruments under his tutelage before setting up his own shop in Waterloo. A world-class builder with a meticulous eye for detail, he remains an active luthier whose deep technical knowledge of guitar construction informs every project. Since joining Folkway in 2018, Dave has become an integral part of our repair machine, tackling some of the shop's trickiest restorations and complex technical challenges. Beyond his precision bench work, he is responsible for managing the shop’s workflow and organization, while covering the majority of client and repair-shop communications.

  • Man holding a vintage Kalamazoo guitar in a workshop with tools and equipment in the background

    Matt Brugger

    Repair Specialist

    Matt Brugger

    Matt Brugger

    Born and raised in southern Germany, Matt traded a career as an electronic engineer for a life dedicated to the craft of luthiery. Honing his technical skills through a prestigious three-year apprenticeship in the heart of the German Alps, Matt graduated at the top of his class. His constant desire to explore diverse building and repair techniques has recently led him to Folkway to combine his professional expertise with his personal love for vintage instruments.

  • Man at workbench working on a guitar refret.

    Dave Scott

    Sales Associate / Repair Specialist

    Dave Scott

    Dave Scott

    A lifelong customer turned dedicated employee, Dave transitioned into his current role after years spent in music retail and repairs at Cosmo Music and Long & Mcquarde. Alongside his technical expertise, he has maintained a vibrant career as a singer-songwriter and journeyman musician, touring extensively across Canada via every mode of transport with various pop artists. His deep connection to the shop’s history is anchored by his 1934 0-17, an instrument he purchased from Rich at the original Guelph location. While he cherishes his vintage Martin, Dave currently spends his time pining after a Banner LG-2, a dream he hopes to realize one day soon.

BEHIND THE SCENES

Repair shop highlights

Here’s a small sampling of the many incredible instruments that have graced our repair benches in recent years.

1938 Martin 000-45

Martin 000-45 from 1938. Neck reset in process.
Martin 000-45 from 1938. Completed neck reset by Mark Stutman.
Martin 000-45 from 1938. Completed neck reset by Mark Stutman.

This original, one family-owned, 1938 Martin 000-45 was brought to Folkway for restoration and subsequent consignment sale. The guitar was near-perfect and was completely original but for a fretboard that had been irreversibly modified, and a DIY bridge reglue that was fairly sloppy.  

A new ebony fretboard was made and installed, with the original fretboard's binding reused to ensure an invisible end result.  The neck was cleanly reset, the bridge was removed and reinstalled once it and the top were cleaned and properly prepped, and the guitar was refretted and set up.  No finish repairs were needed, and the guitar sounded and played as heavenly as Martin's most expensive and most desirable 000-sized guitar of the Pre-War era should.

1943 Martin D-28

1943 Martin D-28. Damaged top from poor past repair.
1943 Martin D-28. Repaired top damage.
1943 Martin D-28. Completed top repair and new bridge by Mark Stutman.

This Herringbone 1943 Martin D-28 was a beautiful and well played guitar. It was perfect apart from a large replacement bridge that had been partially inlaid into the top. The guitar also required a neck reset, fretwork, and set up. 

This was a complicated repair that involved patching the top with Red Spruce that matched the original top's grain, color, and runout. It also included a careful finish touchup to match the 3/16" of new Spruce that would be visible under a correctly sized bridge, and it was completed without doing any overspray or modification of the surrounding original lacquer. A new bridge of the correct dimensions was made and installed, the neck reset, fretted, and the set up completed.

1938 Gibson Advanced Jumbo

1938 Gibson Advanced Jumbo. Replacement bridge by Mark Stutman.
1938 Gibson Advanced Jumbo. Neck reset in process.
1938 Gibson Advanced Jumbo. Completed neck replacement by Mark Stutman.

The Advanced Jumbo is one of Gibson's rarest and most sought after vintage acoustic guitars. We've likely worked on more original AJs than any other repair shop on earth. Lucky us.

This example needed a neck reset and a new original-looking bridge, complete with finish. The replacement bridge is identical in every way to an original Gibson bridge from 1938. With the same meticulous care that we always use for this job, the neck was reset – with a clean disassembly, no finish repair, and without any tooling scars or other evidence that the neck was ever off other than a newly perfect angle. 

1930 Kel Kroydon KK-3

1930 Kel Kroydon KK-3. Replacement bridge by Mark Stutman.
1930 Kel Kroydon KK-3. Refret in process.
1930 Kel Kroydon KK-3. Neck reinforcement being added.

This was without question the single most labour intensive re-fret we've ever done. The Gibson-made Kel Kroydon KK-3 was the most ornately decorated of the Kel Kroydon models built in 1930 and 1931. The guitar featured volcano island artwork on its top, and a pearloid-covered maple fretboard and headstock. Very pretty stuff, but a nightmare for a repairperson as it's not possible to correct a warped neck with heat or by sanding, which makes fretwork nearly impossible to do well. This guitar needed a neck reset, had a huge amount of relief in its neck and also needed a new bridge.

This job entailed carefully removing each block of pearloid from the fretboard, then removing the maple fretboard from the neck. The neck was removed from the body next, and then a carbon fibre reinforcement was installed down the neck's centerline before the fretboard was glued back on using a clamping fixture that corrected for the excessive curvature in the neckwood. The neck angle was reset and the neck was glued back on - all before the pearloid blocks were reinstalled. This was done to allow us to level the fretboard effectively, adding a radius (while we were at it) as a bonus. The pearloid blocks were then cleanly reglued in place, one by one, and then new frets were installed. Once finished (days later), this guitar played with perfect frets and setup, and is quite likely the best-playing Kel Kroydon KK-3 in the world today.

1937 Gibson L-0

1937 Gibson L-0. Completed neck reset by Mark Stutman.
1937 Gibson L-0. Completed bridge re-glue and new saddle by Mark Stutman.
1937 Gibson L-0. Disassembled guitar. Mid-repair.

A barn-find Gibson L-0, with next-level patina, age, discoloration, and wear, this guitar was suffering from countless loose braces, a lifting bridge, poor neck angle, numerous cracks, failing tuners, and unplayable frets. It needed one of everything, which is actually quite normal for a 90 year old Gibson.  But this guitar's owner wanted all the work done without us cleaning, modifying, or altering the "Barn-y" patina; which is a tall order. We use a lot of water-based glue in guitar repair, but water-clean-up would surely leave its mark on the worn and dirty finish. 

This was admittedly a very fun job, as the trick was to develop a way to re-create the look of the aged finish where it was chipped away or washed clean in the course of our repairs. This is likely the best-hidden neck removal/re-installation we've ever done. A healthy mix of skill and luck coming together for a successful outcome.

1930 Gibson L-1

1930 Gibson L-1. Replaced X brace by Mark Stutman.
1930 Gibson L-1. Top removed. Mid-repairs.
1930 Gibson L-1. Re-gluing original binding.

A very early Gibson L-1, this guitar was from the very first recorded batch of large-body Gibson L-model flattops built in the winter of 1929/30. Like many Gibson flat tops from early 1930, this guitar was built and braced far too lightly to withstand the high tension of steel strings; and like many, it imploded. The X brace splintered, the top splintered in front of and behind the bridge, other braces were badly deformed or otherwise cracked - it was a mess, and needed to be fully rebuilt.  

The guitar was disassembled and the top was removed. The braces were removed from the top, and then the top was slowly reshaped over the course of weeks using water and weight. Once flat, all the various cracks were glued, new look-alike braces were made and installed, and the top was reinstalled. The original binding was reinstalled, the neck reset, and the guitar set-up. Once done, it held its shape well and sounded fabulous, like a 1930 L-1 should. This particular repair show and tell could have had about 17 more photos, but hopefully you'll get the idea with the three we've shown here.

SOCIALS

Latest posts